71 lines
3.3 KiB
Markdown
71 lines
3.3 KiB
Markdown
# NOTES
|
|
|
|
## RAM8
|
|
|
|
trick is to figure out how to mux twice based on address, once for setting the load bit and once for picking the correct output bus.
|
|
|
|
## RAM64
|
|
|
|
Interesting part here is that the `MSB|LSB` decision is arbitary. You could use the LSB to pick the RAM8 module, and use the MSB as the address within the RAM8, and it _would still work_. The caller for RAM64 doesn't care how you use the "complete address". It just cares that you return the same thing for that address.
|
|
|
|
## RAM512
|
|
|
|
I used the premise of the previous note and decided to index the RAM64 moduls by the LSB instead of the customary MSB. It still works :metal:
|
|
|
|
## PC
|
|
|
|
The Program Counter was tricky. I ended up using a Or8Way (instead of a `Or3Way`, which we don't have) along with `Mux8Way16` to pick the input for the register. Since the Mux has duplicate inputs at this point (supports 8, but we only have 3 special, and 1 neutral case) - this can be optimized by switching to a `Mux4Way16`, along with some other changes.
|
|
|
|
## Fill.asm
|
|
|
|
Figured out [that my RAM16K implementation was wrong](https://github.com/captn3m0/nand2tetris/commit/90526cc036a93683f3fa335aae70cc17c787e5a5) while working on this. The rough pseudocode would be:
|
|
```c
|
|
int r0=*screen;
|
|
while(true) {
|
|
int color = 0;
|
|
if (*kbd > 0) {
|
|
color = -1;
|
|
}
|
|
|
|
// This sets an entire row of pixels to color
|
|
// each row has 32 registers (512/16) that we set to color
|
|
*r0 = color;
|
|
*r0+1 = color;
|
|
*r0+2 = color;
|
|
*r0+3 = color;
|
|
*r0+4 = color;
|
|
// and so on
|
|
*r0+31 = color;
|
|
|
|
// if we are on the last row
|
|
if (r0-24575 <=0) {
|
|
r0 = *screen;
|
|
}
|
|
}
|
|
|
|
```
|
|
|
|
So every "cycle" of the loop, we are coloring an entire row. The row is decided by R0, which is set to @SCREEN at the start. So if you press a key while we are on the middle of the loop (say 120th row), everything from that row onwards would get painted in black, and then the loop resets r0=\*screen once we cross the limits. The next iteration of the loop then starts filling the white pixels we'd left in the previous iteration. I kept the smallest paint unit as the row, but it doesn't really matter that much. The only difference is that I'm reading kbd a total of 256 times to paint the screen. Reading once per register also would work, and reading once per "screenfill" would also work. But that changes the 'delay' b/w your keyboard press and the screen fill start. I thought per row was a good compromise.
|
|
|
|
## Memory
|
|
|
|
Started by using a Mux4Way16, but then decided against making the same mistake I did in PC. Switched to 2 Mux16s instead.
|
|
|
|
## CPU
|
|
|
|
No tricks, fairly straight forward implementation of a few Mux atop the ALU. Things I missed on the first pass:
|
|
- Ensuring that control bits for writeM or jumps are _only_ set when instruction is C. This is just ANDing the relevant control bit with instruction[15]
|
|
- `!ng != positive`. Zero being the exception. So `positive = !(ng | zr)`. I think the whole jumpToAddress bit calculation can be improved though.
|
|
|
|
## Computer
|
|
|
|
The hardest part about this was deciding what name to give to all the pins
|
|
|
|
## Assembler
|
|
|
|
I think there are definitely some tricks with reducing lookup table sizes, but I wasn't really aiming for performance (I wrote it in ruby afterall). Also working on a rust implementation, just to learn rust.
|
|
|
|
# VM (1)
|
|
|
|
See `vm/README.md` for more details. Observations go here, implementation notes are there.
|